Daily maintenance of automatic edge sealing machine.
Issuing time:2020-04-22 00:00
Automatic edge sealing machine is a high precision, high efficiency, high speed of the furniture plate for the straight line edge sealing, repair, scraping and polishing equipment, but a lot of people in the use of the process, easy to ignore the maintenance work. Although maintenance and maintenance will consume a certain amount of manpower and material resources, but also to maintain the maintenance of good equipment. Because the value of the equipment is very high, on time as required maintenance of equipment, not only to ensure normal production, but also to extend the service life of the equipment, the maximum use of the value of the equipment. Next, I will summarize four important points for you to pay attention to:
One, Regular maintenance
Sealing machine to carry out regular maintenance, and to each maintenance work record, record the wearing degree of bearings, gears, blades, etc. Usually the recuperation cycle of the edge sealing machine is about 20 days, and the specific maintenance interval should be carried out on time as required.
Two, Keep clean and tidy
The banding machine should clean the wood chips and various sundries after each work to prevent them from winding on the motor and causing the motor to get stuck. Clean up some stains on the surface of the machine, keep the edge sealing machine clean, and prevent harmful substances from causing corrosion on the surface of the machine.
Three, regular lubrication
The sealing machine regularly handles the lubrication system, cleaning the chains, sprockets, gears and bearings of each part, and then maintains the machine oil. In the selection of lubricants should also pay attention to the choice of good quality, so as to better prolong the service life of the machine.
Four, Data backup
Most of today's automatic edge sealing machines are connected to the computer, so as to achieve automatic operation, if there is a problem with the computer system, it will affect the normal operation of the machine. Therefore, it is necessary to back up the set data regularly, so as to avoid the loss of data and the impact on production.